Picture Frame Around a Hole Like an Art Musem

Download Article

Download Article

Photographs provide u.s. with a great way to preserve and brandish treasured memories, and framing pictures allows photographs to be decorative, likewise. Information technology'due south important to know the bones steps of how to frame a picture to keep your photographs protected and make your pictures expect nifty when they're on brandish. Below, you'll find out how to choose a pre-made frame, as well as how to mat and brand a basic wooden frame of your own. This is an like shooting fish in a barrel project that can be washed in under an 60 minutes with the right tools. Merely get started with Step 1 beneath!

1. 1

   Consider the design of your room. If the room looks modernistic, you'll want to avoid ornate, wooden frames. If the room is classic, y'all'll want to avoid sleek or brushed metal, modern-looking frames. Of course, this rule can be broken in gild to make a blueprint statement.

2. 2

   Consider the style of the picture. Older fashion pictures will more often than not look more at home in older styled frames. You lot volition also want to consider the color of your picture. If blackness and white, it will look better with a colored or blackness/white frame. If the picture show has color, it can look amend with either color frames or wooden frames.

   Ad

3. 3

   Choose the frame way. You'll have to decide if you want a thin frame, thick frame, shadow box frame, or other styled frame. Some pictures, such equally printed canvases, might wait better with no frame at all!

4. 4

   Choose the size relative to the room. Do you desire the motion picture to feature prominently in the room and take up a large amount of space or do you lot want to have information technology be smaller and but be a beautiful detail to the room? You'll have to determine what works meliorate for your design.

5. five

   Cull the size relative to the movie. Think about how large the pic is going to be. Now, do you lot want there to be a lot of space between the picture itself and the frame? Or do you desire there to exist no infinite at all? 1-2" of mat (or space betwixt the frame an picture) is normal, as is no mat whatever. However, you can make a dramatic statement by having a larger gap (iv-6" or more).

   • Of course, this is relative to the size of the picture. If the picture is enormous, a four" mat might be very reasonable. Using an acrid-free mat board is recommended.

6. 6

   Choose your color. Generally, black, white, and brown are considered proficient neutral colors that volition by and large lucifer with most pictures. You tin can also go with colors, nevertheless. This is an especially adept idea if you actually want to make a picture show pop, and draw attention to it in the room.

   • Generally, y'all would choose a colour by finding a highlight or pregnant colour in the moving-picture show so making the frame that colour. For example, if your degree has a red seal, you lot might make that pop by having it framed in a matching ruddy likewise.

7. seven

   Consider using a mat. If you decide to accept a gap between the frame and the flick, you'll need a mat. This is a piece of paper, cardboard, or cardstock which creates a secondary "frame" for the picture. You lot'll need to determine what color you desire your mat to exist. Usually, a white or cream color is used, but yous can too use more brightly colored mats which compliment your picture.

Advertisement

1. one

   Measure your mat. Take the measurement of your picture and add the width yous want for your mat to get the mat size. Let's frame an imaginary 8x10 photo. For this photo, we want a mat with a 1.5" width. So the measurements for the mat become 11x13" (since the width needs to exist added to each side).

2. 2

   Cutting the outside border. Measure a square corner, using a tool if you have i, and then cutting the mat to the desired measurement. Use a box cutter or other extremely precipitous tool in order to become a clean line. Our mat volition be 11x13" around the outside.

3. 3

   Cutting the inside edge. Cutting the within edge where yous want the motion-picture show to go. The usual advice is to have the gap on the lesser marginally larger than the one on pinnacle (this should be near imperceptible). Dry fit it to figure out where you want it and and then measure and cut a hole in the center of the mat that fits the measurement of your prototype.

   • A good tip is to mensurate the verbal shape, in this case the 8x10 rectangle, then make the actual cuts merely inside of the line you drew. This fashion you won't accidentally finish upwardly with gaps where you lot made the hole too big.

4. 4

   Adhere the picture. Fit the picture into the hole for the mat. Accept ii pieces of tape and employ them to span the gap along the superlative line. These should exist evenly spaced, towards the center. Next, have two more pieces of record and identify these over the top, mat-side of the kickoff tape pieces. The long border of these pieces should follow the line of where the pic and mat meet.

   • This is a condom fashion to tape photos to mats, since the tap can merely exist cut where the picture and mat come across, leaving only minimal tape on the picture itself.

Advertisement

1. ane

   Gather your materials. Nosotros're going to make a frame for our theoretical 8x10 photo with our 1.5" width mat. You'll demand:

   • 1x2 lumber in a wood blazon of your choice
   • 1/4" square dowels in a matching or pleasantly contrasting wood of your option
   • five mm diameter dowel rods
   • A miter box, saw, square measure out, and measuring tape
   • Gum and rubber bands
   • Materials to brand a basic jig, such as plywood.
   • Optional materials like paint or stain

2. 2

   Cutting the pieces to the desired lengths. For at present only think near the 1x2s. The inside measurement of that portion of the frame will be the aforementioned size every bit your mat, with the outside measurement adding the additional length for the miter. Cut the 1x2s to the size you lot'll need for the outside measurement of the frame. Once you have your 1x2s cut, cut your square dowels to the aforementioned measurement.

   • In our instance, since the 1x2s are actually 1.5" x .75", we need to add 1.5" to each end to get the outer border measurement. So the short side pieces will then be fourteen" and the long side pieces volition exist xvi".

3. iii

   Mucilage the two sections together. Gum the square dowel to the 1x2, so that the faces are flush.

4. 4

   Miter the ends. Using a box miter (or miter saw, if you have one), cut the ends of the four pieces and so that they are at a 45 degree angle. The curt stop of each miter should be on the side with the foursquare dowel. Sand whatever rough edges.

   • The measurement on one side of the short pieces should now be 14", with the other at 11".
   • The measurement on i side of the long pieces should now be sixteen", with the other side at 13".

5. 5

   Make a uncomplicated jig. Set up out a plywood sail. Measure out the outline of the 14x16" frame, too as the inside 11x13" shape. Blast small pieces of scrap wood at the center on both the inside and outside lines, so that the pieces of the frame tin sit snugly between them with the mitered corners still accessible. Glue the mitered edges and and so insert the pieces into the jig (careful not to gum them to the surface).

6. 6

   Drill and insert dowels. Using a drill, make airplane pilot holes and then drill a 5 mm hole for your dowels at each of the four corners. This should laissez passer diagonally through the corner, passing at the halfway point along the mitered edge. And so, cover your dowel in glue and fit it through the hole. In that location should be some extra sticking out on either side. Stretch rubber band around the dowel ends on opposite sides of the frame to hold it together and and so remove it from the jig. Allow the gum to dry.

7. seven

   Sand and add finishing touches. Score and snap off the actress dowel ends and then sand it down until it's shine. Yous can now paint or stain your flick frame.

8. viii

   Cut glass or plastic. You can get glass custom cut to the measurement of the larger square (and so that it nestles in the recess created by the foursquare dowels). You tin can also buy articulate acrylic and cutting information technology to size (score on 1 side and then snap). Place the plastic into the recess, followed past your mat and motion picture. A backing can be added or you tin can employ nails or clips to hold the moving-picture show and glass in place.

Advertisement

Add New Question

• Question

  How do I choose a frame for my fine art?

  

  Peter Salerno is the possessor of Claw it Up Installation, a professional installation company, which has been hanging art and other objects effectually Chicago, Illinois for over 10 years. Peter also has over 20 years of experience installing art and other mountable objects in residential, commercial, healthcare and hospitality contexts.

  

  Installation Skilful

  Skilful Answer

  Match the frame to the motion picture for long-lasting appeal. You lot should choose a frame that's going to accentuate the image, rather than picking something because information technology goes with the rest of your décor. Yous might change your furniture or paint your walls, but you're probably going to have this piece of fine art for the rest of your life.

• Question

  If I want to frame a 10 ten 13 picture with a white background, is it still necessary to add a mat?

  

  No, it's not necessary to add together a mat, just information technology might nonetheless be a expert choice.

• Question

  Is pic framing useful? Tin't I simply use blu-tac to stick my photo to the wall?

  

  Yes, you could, but many people detect frames to be more aesthetically pleasing. You certainly don't have to use one if you don't desire to.

• Question

  If I am framing a xvi x 20 picture with a 1 1/2 inch matte, what size frame practise I demand?

  

  xix x 23 if you're using the entire picture show. Put the matte over the motion-picture show and measure out it.

• Question

  I'm upcycling a moving-picture show frame. The clips I commonly undo (a type to hold the picture in) unremarkably stay in place but these clips take come out and I cannot become them back in. What is the difference?

  

  Noodle_knows_it23

  Community Answer

  If the picture will not stay in, use tape to stick it on to the edges instead.

Ask a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Advertisement

• Consult with a local framing company if you don't know how to cull a frame.

Advertising

• If your flick is special to you lot, y'all may desire to get special glass that volition protect the picture from sunlight. Over fourth dimension, the sunlight may fade the picture.

Advert

About This Commodity

Article Summary X

To frame a picture, go with a frame that matches the type of motion picture you're framing. For example, you lot might opt for a black frame to complement a blackness-and-white flick, or a wooden frame for a colored photo. Also, cull a large frame if you want the photo to stand out, or a smaller frame if y'all want the picture to be more than subtle. If you desire in that location to be a space between the frame and the picture itself, mount the moving-picture show on a mat made of newspaper or cardstock. For tips on how to make your own movie frame, read on!

Did this summary help you lot?

Thanks to all authors for creating a page that has been read 155,859 times.

Did this article help you lot?

lundgrenyestand.blogspot.com

Source: https://www.wikihow.com/Frame-a-Picture

Share this post